painting metal kitchen cabinets

Getty images even if you don't have a ton of cabinets, once all of the doors and hardware are removed, it can be difficult to remember what goes back where.Between coats, sand the surfaces lightly, making sure to clean up the debris afterward.Put on a respirator and aerosol the chiffonier and drawers with a distinct accoutrement of metal primer.Allow the primer to dry completely before applying the top coat of paint.Use a steady back and forth motion with the can.

Supply list for this diy metal cabinet makeover:Apply a second coat to the cabinet.This coat should provide a perfect, consistent finish without any thin or light areas where wood might show through.Mark the doors and cabinets with tape where they go.Start by painting the inside edges and openings of the face frames, then the outer cabinet sides and finally the face frame fronts.

You must remove the existing paint on the kitchen cabinets before.How to paint cabinets make sure they are clean and dry.This keeps small particles of dust and debris from mixing in with the paint and marring the finish.Then you can finish with a coat of acrylic latex paint.Failing to label the hardware and doors credit:

When the bonding primer coat is fully dry, go over the surface with 220 grit sandpaper to smooth any ridges that may have occurred in the primer as it dried.Spray on one accoutrement of metal enamel.The first step you should do is prepared.If you have the time to let it dry for a day, that would be preferable, but a few hours will do in a pinch.Remove knobs, pulls, and other visible cabinet hardware before painting laminate cabinets for smooth paint application without obstructions.

Spray light coats of paint.